B0031 Raspberry Pi Camera with M12x0,5 Lens (OV5647)

Item number: 2018851

EAN: 4260513994739

  • A M12 Mount lens module that allow you to use various lens on Raspberry Pi
  • Focus the sharpest way – From less than an inch to infinity, you get easy focus control on a Raspberry Pi camera simply by spinning and tuning the lens and the locking ring. Check B0176 for software auto focus/manual focus
  • Compose the perfect frame – You decide how to frame up the best image by picking an m12 lens with the best FoV (Field of View) you need with a variety of M12 lenses on the market to choose from
  • Example projects – Shoot a waterdrop half an inch away with tuned focus; Shoot a QR code or A4 paper from the other end of the room with telephoto M12 lens; Stitch a panorama with fisheye m12 lens
  • Options – Get M12 lens set “Arducam LK001” for optical testing and “Arducam LK002” for minimum distortion in machine vision; Get “Arducam B0055” for m12 fisheye and “Arducam B003503” for m12 night vision. Get a lens without IR filter to make this camera IR sensitive. ( Contact Arducam for other options )
  • Note – 1. This board is slightly larger(36cm) than the official Raspberry Pi Camera V2 so it does not fit some cases for Raspberry Pi, but it’s natively compatible with the commands and scripts; 2. It works with Pi Zero, but you will need to buy an extra cable; 3. Be gentle while changing the lens and holders or you might damage the thread, but it’s easily fixable with a new m12 holder.

Category: Sale

Now only 14,89 €

including 16% VAT. , plus shipping

Old price: 18,62 €
Discount: 20%
Available now!

Shipping time: 1 - 3 workdays

The Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The camera is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system.

Specs:

  • Sensor
    - Sensor size: 1/4” (OV5647)
    - Resolution: 5MP 2592×1944
    - Video: 1080p 30 fps, 720p 60fps, 480p 90fps
  • Lens
    - Focal Length: 4mm (You can screw the lens for focusing)
    - Horizontal Field of View (HFOV): 56°
    - Thread Size: M12×P0.5
  • Camera Board
    - 3V3,GND,FREX,STROBE,VSYNC
    - Dimension: 36×36 mm, 4 mounting holes

Features:

  • Lens holder: M12x0.5
  • 5MPixel sensor
  • Integral IR filter
  • Max frame rate: 30fps
  • Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
  • The Camera Lens for Raspberry Pi Camera Board is HX-27227
  • OmniVision 5647 sensor in a fixed-focus module with replaceable Lense

Package Including:

  • 1pcs 5 Megapixels OV5647 Sensor Camera Module
  • 1pcs 15cm 15pin FPC cable

    Note:  - Raspberry Pi Type B Development Board is not included
                - You might need extra m12 lenses to unlock its full potential
                - Often, focusing a lens is performed while monitoring the image quality on a video screen.
                - The Raspberry Pi motherboard is not included in the package
Shipping weight: 0,02 Kg
Dimensions ( length × width × height ): 4,00 × 4,00 × 4,00 cm
Contact
Question on item
code
Other customers have also bought the following items
B0102 Arducam 8 MP Sony IMX219 camera module with CS lens...

B0102 Arducam 8 MP Sony IMX219 camera module with CS lens 2718 for Raspberry Pi

Now only 45,47 € *