CO2 Ampel (Plus Version) - Lora 433MHz

Item number: 20182099-002

The CO2 traffic light is a simple solution to measure the CO2 level in a room and transmit the data via the OnBoard Lora module.

The 4pcs WS2812 LEDs are showing the CO2 ppm level:

  • green 0-999ppm
  • yellow 1000-1499 ppm
  • red 1500-1599ppm
  • red flashing + buzzer >1600ppm

Category: Compatible with Arduino

Frequency
82,07 €

including 19% VAT. , plus shipping

available

Shipping time: 15 - 17 workdays

Zubehör CO2 Ampel

  • USB cable A connector> C-connector

    USB-cable in example to connect your FTDI Breakout V3.0 or CO2 traffic light with a PC or power supply

    • USB 1.1 und 2.0 compatible
    • Length: 3,0m
  • • Plug-in switching power supply with europlug
    • Universal input
    • Protections: short circuit/over load
    • Insulation Class II
    • Low no load power consumption

    Input voltage range: 90...264V AC   
    Temperature:     -5...+45°C
    Output: USB-A-Buchse     / 5V - 1,2A
Your configuration

The CO2 traffic light is a simple solution to measure the CO2 level in a room and transmit the data via the OnBoard Lora module.

The 4pcs WS2812 LEDs are showing the CO2 ppm level:

  • green 0-999ppm
  • yellow 1000-1499 ppm
  • red 1500-1599ppm
  • red flashing + buzzer >1600ppm

The controller comes with a Arduino compatible bootloader and so you can flash or modify the firmware via the Arduino IDE.

On Board you will find:

Shipping weight: 0,05 Kg
Dimensions ( length × width × height ): 5,00 × 5,00 × 2,00 cm
Contact
Question on item
code