senseBox Home

Item number: 201825

EAN: 4260513990403

The senseBox is a Citizen Science Toolbox for schools and citizens.
You can connect different environmental sensor to senseBox mainboard (MCU) and the data can be transmitted via LAN, WiFi or Lora to the openSenseMap.

Category: senseBox

starting from 124,95 €

including 19% VAT. , plus shipping


Shipping time: 1 - 3 workdays

senseBox interface
  • XBee footprint compatible LoRa Module with HopeRF RFM95W LoRa (Long Range) Wireless Transceiver.


  • XBee footprint compatible WiFi/WLAN Module with Microchip ATWINC1500 WiFi Network Controller.


  • XBee footprint compatible LAN Module with WIZnet W5500 Ethernet Controller.

    • WIZnet W5500 Ethernet Controller (10/100Mbps)
    • Integrated IPv4 stack
    • SPI interface with 5V tolerant inputs
    • XBee compatible Pinout (3.3V)


  • XBee footprint compatible Module with microSD Socket.

    • microSD-Socket
    • SPI interface
    • XBee compatible Pinout (3.3V)


senseBox sensor
  • Light Sensors for senseBox Boards.

  • The Nova Fitness SDS011 Dust Sensor using principle of laser scattering and can get the particle concentration between 0.3 to 10µm in the air. It has a digital serial output and built-in fan.
  • The BME680 is one of the newest Bosch pressure, temperature, humidity and gas sensor with digital I2C and SPI interface. On the breakout you can find a voltage regulator and level translator, so you can use the board on 3V to 5,5V systems.
  • The HDC1080 is a digital humidity and temperature sensor with a I2C interface.
    You can use the sensor on 3,3V and 5V system with a low current from 1.3 µA @ 1sps, (11 bit RH and Temperature Measurement).
  • It is a 128x64 pixel OLED extension for the senseBox to show sensor data.
  • This is a breakout board with the u-blox CAM-M8Q Multi GNSS Module for GPS, QZSS, GLONASS, BeiDou and Galileo data.
    On the breakout you find the u-blox CAM-M8Q module, a CR1225 battery holder for the backup battery.
  • This is a senseBox sensor hub to connect more I2C based senseBox sensor to the senseBox MCU.

Your configuration

The kit contains:

- senseBox MCU
- Temperature- & Humidity Sensor
- Outdoor enclosure
- sensor enclosure
- sensor mount
- 5m USB cable

Shipping weight: 0,89 Kg
Dimensions ( length × width × height ): 34,50 × 22,50 × 10,00 cm
Question on item


This product consists of
Other customers have also bought the following items
WiFi Bee

WiFi Bee

29,99 € *
senseBox BME680

senseBox BME680

29,99 € *
senseBox OLED

senseBox OLED

19,99 € *
senseBox GPS

senseBox GPS

40,00 € *